Neuramis Filler 5,990.-/cc. Please add LINE

Ultraformer III: The Trendy Way to Tighten Your Skin Without Surgery

Sagging facial skin is an issue that can occur from teenage years to middle age. It can be caused by many different factors. When your face starts to sag and you lose confidence, you might want to tighten it up. However, surgery is scary, expensive, and takes time to recover. So, people look for other solutions like Botox to define the face or Meso Fat to reduce chubby cheeks and double chins. But sometimes, these aren’t enough to lift the face. When searching for ways to tighten the skin, you might find Ultraformer III and Thermage . These are non-surgical procedures that show results from the first session

In this article, we will talk about Ultraformer III, a machine that tightens the skin and reduces wrinkles without surgery. It uses energy waves to make the face look younger. Let's find out if it really works.

Select a Topic to Read

What is Ultraformer III?

Ultraformer III is a machine that tightens the skin and boosts collagen production using Focus Ultrasound energy. It’s the same type of ultrasound used in pregnancy scans but with different technology. Ultraformer III uses Micro and Macro Focused Ultrasound (MMFU) with high-frequency waves that reach deep skin layers, including the SMAS layer (the same layer targeted in facelift surgery). This makes the skin lift from the muscle layer.

How does MMFU work?

MMFU stands for Micro and Macro Focused Ultrasound. It uses high-frequency waves to tighten the skin in the SMAS layer, the same layer targeted in facelift surgery. MMFU helps dissolve fat and stimulates collagen production. The energy creates tiny heat points at 65-70°C under the skin, making the tissue contract and tighten. It also helps break down fat and encourages new collagen in the deeper skin layers.

What does Ultraformer III help with?

Reduces sagging skin on cheeks, double chin, and neck
Reduces wrinkles around the nose, eyes, forehead, and between the eyebrows
Boosts collagen production for more elastic, youthful skin
Breaks down facial fat
Defines and contours the face

Where can Ultraformer III be used?

Ultraformer III can be used all over the face and neck. It can lift cheeks, double chin, define the jawline, lift eyebrows, and smooth out wrinkles around the eyes, forehead, between the eyebrows, and smile lines.

Who is Ultraformer III suitable for?

Ultraformer III is great for people with sagging skin on the face, cheeks, double chin, droopy eyelids, and eyebrows. It’s suitable for both young people with early signs of wrinkles and older people with more noticeable sagging. It helps by stimulating new collagen to keep the skin looking youthful.

How does Ultraformer III compare to Thermage and HIFU?

Procedure	Ultraformer III	Hifu	Thermage
Key Features	Tightens sagging skin and boosts collagen	Defines and contours the face	Breaks down facial fat and stimulates collagen production
Technology Used	Micro and Macro Focused Ultrasound	High Intensity Focused Ultrasound	Manopular Capacitive Radiofrequency
Who It’s For	People with sagging cheeks and double chin, undefined jawline	People with sagging face, lack of firmness	People with facial fat, sagging cheeks, and double chin
Results	Firmer, tighter skin in 1-2 months	Tighter skin in 1-2 months	Reduced facial fat, firmer, tighter skin in 1-2 months
Duration	6-8 months	5-6 months	Up to 1 year

Nowadays, people prefer Ultraformer III over HIFU because it shows more noticeable results, thanks to its advanced technology, which provides more stable and deeper energy waves. It lasts longer and costs about the same.

Ultraformer III cartridges and where to use them

There are 3 sizes of cartridges for Ultraformer III

2.0 mm depth cartridge (Cherry Pink cartridge) This is used on the upper skin layers. It helps smooth out fine lines around the under-eye area, forehead, and between the eyebrows.
3.0 mm depth cartridge This is used on the middle skin layers. It helps reduce fat under the skin, stimulate collagen production, lift, and tighten the face.
4.5 mm depth cartridge It helps to lift the areas around the cheeks, jowls, neck, and jawline because it is a device that can deliver energy deep to the SMAS layer of the skin, which is normally the area used for surgical facelifts.

How many shots are used for each area?

The number of shots needed depends on each person's skin structure. The doctor will assess the sagging areas, fat under the skin, and wrinkles, and will also consider the customer's specific concerns to determine the right number of shots.

Can Ultraformer III be combined with other procedures?

Yes, you can combine it with other procedures like Botox, fat-dissolving, or filler injections on the same day. However, if you have had other procedures before, it's recommended to wait 2-4 weeks before getting Ultraformer III to ensure the best results.

Does Ultraformer III hurt?

During the procedure, the machine sends energy waves into the skin, causing a warm, tingling sensation. The level of discomfort varies from person to person depending on their sensitivity.

When will you see results from Ultraformer III?

You will see initial results immediately, about 10-20% improvement. Full collagen production happens in 1-2 months, and the effects last for 6-8 months. After this, the skin will slowly return to its original state, but it won't sag as much as before because the collagen boost slows down the aging process.

When should you repeat Ultraformer III?

Generally, you can repeat Ultraformer III every 2 months to maintain results. Regular sessions will keep your skin firm, lifted, and healthy.

How to take care of your skin after Ultraformer III

You might feel sore under the skin, which is normal and will improve in 2-4 weeks.
Your skin might feel dry after the procedure, so use a moisturizer.
Avoid direct sunlight and use sunscreen 1-2 times a day to help the collagen under your skin recover.

Who should not get Ultraformer III?

People with blood circulation or clotting disorders
People with sensory disorders
People with uncontrolled chronic illnesses like heart disease, diabetes, or high blood pressure
People with a pacemaker
People with metal implants in the treatment area
People who had facial surgery should wait 6 months to 1 year before getting Ultraformer III

Ultraformer III reviews

How much does Ultraformer III cost?

At MEGA CLINIC, the cost depends on the number of shots needed. The doctor will assess your individual issues to determine the right amount of shots, ranging from 200 to 1,200 shots.

MEGA CLINIC uses genuine Ultraformer III machines imported from Korea, certified by the Thai and Korean FDA. You can verify this at Quantum Aesthetic Before starting the procedure, the doctor will evaluate your face and ask about your concerns to determine the number of shots needed for the best results. You can consult the doctor for free if you have any worries.

Getting Ultraformer III at MEGA CLINIC

*All promotions end on December 31, 2024. Screenshot and ask to claim your deal. Click here!

Q&A Ultraformer III – Answering all your questions

Q: Does Ultraformer III hurt? Does it cause swelling?

A: At the clinic, the doctor does every Ultraformer III session personally, ensuring safety, no bruising, and no need for recovery time. After the procedure, you can apply cream and wear makeup right away. If you are worried about pain, it feels like a light snap on the skin. However, the pain level may differ based on how sensitive your skin is.

Q: Can I do Ultraformer III if I have acne?

A: Having acne doesn’t affect the Ultraformer III procedure at all. The machine works by sending energy waves under the skin to stimulate collagen production. It doesn’t disturb the outer skin layer or cause more acne.

Q: Can I do Ultraformer III with someone who is not a doctor?

A: You should only do Ultraformer III with a skilled doctor because they understand how to use the machine correctly. They can analyze your skin and adjust the energy waves to suit your specific skin condition.

Q: How many shots of Ultraformer III do I need to see results?

A: The number of shots depends on your skin condition. The doctor will assess issues like sagging, fat under the skin, and wrinkles to decide the right number of shots. Using too few shots may lead to unclear results that don’t last long, as the energy won’t be enough to fully stimulate the skin.

Q: How old should I be to do Ultraformer III?

A: You can start at a young age because this is a safe procedure with no danger. Starting early helps stimulate new collagen in the skin, keeping it firm. It also slows down the development of wrinkles and sagging skin in the future.

Q: Will I see results right after my first Ultraformer III session?

A: After your first Ultraformer III session, you will see around 10-20% improvement immediately, feeling the skin become firmer. The full results will become clearer in 1-2 months as the collagen is fully stimulated and produced.

Facial lifting with Ultraformer III is a non-surgical solution for sagging skin that lets you live your normal life immediately after the procedure. It helps contour the face, giving a V-shape, reduces wrinkles, and boosts collagen for firm, plump skin, making you look younger and more confident.

MEGA CLINIC's experienced doctors are ready to provide detailed consultations and skin assessments. They will choose the right procedure for each person to achieve the best results and effectively address skin issues.

Before booking an appointment, you can get a free initial consultation and skin assessment with our expert doctors via LINE Official: @megaclinic (with @) or by clicking the green button below.